PERANCANGAN SISTEM POKA YOKE OTOMASI PADA MESIN PANCACAH SAMPAH UNTUK PENUNJANG KESELAMATAN PEKERJA TPS3R

Authors

DOI:

https://doi.org/10.51135/jts.v4i02.152

Keywords:

Waste Management, Workplace Accidents, Occupational Safety, Poka Yoke System, Automation Sensors

Abstract

Waste management has become a crucial issue due to the lack of adequate tools, with workplace accidents continuously rising in this industry. According to data from the ILO, there were 2.78 million deaths due to work-related accidents and diseases in 2017, an increase from 2.33 million in 2011. In the waste management sector, workers face injury risks such as fractures, eye damage, and spinal problems, with potential hazards arising from landfill collapses, fires, and getting caught in processing machines. This research aims to design an automated poka yoke system for waste shredding machines to enhance occupational health and safety (OHS) at TPS3R (3R Waste Management Facility). The methods used include the design and testing of a sensor-based automation system to prevent work errors. This system employs photoelectric proximity sensors and inductive proximity sensors to detect hands and metals entering the machine. Testing shows that the photoelectric sensor detects objects at distances of 5-25 cm in the organic and inorganic shredding area with a success rate of 100%, while the inductive sensor successfully detects metals such as screwdrivers, iron plates, and cans. The results of this study indicate that the implementation of an automated poka yoke system can minimize the risks of workplace accidents and machine damage due to human error. Additionally, this system is effective in enhancing operational safety.

Downloads

Download data is not yet available.

Author Biographies

Ary Putra Prasetia, Universitas Dian Nuswantoro

Industrial Engineering Study Program, Dian Nuswantoro University

Dwi Nurul Izzhati, Dian Nuswantoro University

Lecturer of Industrial Engineering Study Program, Dian Nuswantoro University

References

N. Kholili, A. Hindriatmo, and A. Nugroho, “Penerapan Metode Quality Function Deployment dan Antropometri dalam Perancangan Desain Mesin Cacah Sampah Organik dan Non Organik,” Journal of Research and Technology, vol. 7, no. 2, pp. 163–174, 2021.

Prabowo, “Uji Ergonomis Pada Alat Pencacah Pelepah Sawit Tipe Serut,” Universitas Sumatra Utara, Medan, 2019.

F. Burlian, I. Yani, Ivfransyah, and J. A. S., “Rancang Bangun Alat Penghancur Sampah Botol Plastik Kapasitas ±33 Kg/Jam,” SEMINAR NASIONAL TEKNOKA ke-4, vol. 4, pp. 17–23, 2019.

F. Segara, “Desain Mesin Pencacah Limbah Botol Plastik Dan Softdrink Kapasitas 10 Kg/Jam,” Universitas Muhammadiyah Sumatra Utara, Medan, 2019.

A. Setiawan, S. B. Bhaskoro, and A. R. Harits, “Sistem Otomatisasi Pokayoke Kanban Cek di PT Denso Indonesia,” Jurnal Teknologi dan Rekayasa Manufaktur, vol. 5, no. 1, 2023, doi: HTTPS://DOI.ORG/10.48182/JTRM.V5I1.118.

T. H. Mulya and S. M. Nasri, “Identifikasi Risiko Kecelakaan Kerja Pada Pekerja Sampah dan Prevelansinya,” Jurnal Kesehatan Tambusai, vol. 4, no. 2, pp. 2241–2252, 2023.

J. Segala and R. Arya, “Perancangan Poka Yoke Untuk Menghindari Kesalahan Penerapan Metode Fifo Pada Storefinish Good di PT Trimitra Chitrahasta,” Jakarta, 2021.

C. D. Permana, R. Ferdiansyah, P. F. Safira, A. T. Z. Gumilang, J. A. Pangestu, and A. W. R. Rozak, “Otomasi Industri Sebuah Peluang Atau Ancaman,” Pengabdian Masyarakat : Pemberdayaan, Inovasi dan Perubahan, vol. 3, no. 3, pp. 1–6, 20232, doi: https://doi.org/.

Downloads

Published

20-10-2024

How to Cite

Prasetia, A. P., & Izzhati, D. N. (2024). PERANCANGAN SISTEM POKA YOKE OTOMASI PADA MESIN PANCACAH SAMPAH UNTUK PENUNJANG KESELAMATAN PEKERJA TPS3R. Jurnal Teknik SILITEK, 4(02), 116–124. https://doi.org/10.51135/jts.v4i02.152

Issue

Section

Artikel

Similar Articles

You may also start an advanced similarity search for this article.